Inserting Printing Cartridge; Install Pcset Graphic Software - Reiner 940 Mode D'emploi Succinct

REINER 940

1.2. Inserting Printing Cartridge

Inserting printing cartridge
Depending on ink type used, different Protective Nozzle Seals are required.
Use sealing of the enclosed printing cartridge.
Turn the setting wheel
f
Push the cartridge cover release key
f
Take the cartridge
f
Insert the cartridge
f
Close the cartridge cover
f

1.3. Install PCset graphic Software

Installation is only possible with administrator rights on the computer.
Insert PCset graphic CD into the drive.
f
If the installation programme does not start up automatically, start the file "setup.exe".
f
Observe the installation programme instructions.
f
1.4. Firmware update
The most up to date firmware for the REINER 940 can be downloaded from the
REINER website (www.reiner.de).
1.5. Recognising and Removing Interferences
For more information, see the online help of the PCset graphic software, or the enclosed CD.
© 2019 Ernst Reiner GmbH & Co. KG
All rights reserved. Translation, reprint and other reproduction of these operating instruc-
tions, even in parts and no matter the form, shall require our express written consent. We
reserve the right to make content changes to these operating instructions without notice.
Fig. A +

1
to position Off.
14
downwards, to open cartridge cover
13
out of its packaging and remove protective film from the jet
13
.
12
.
C + E
12
.
18
.
GB
10