ECOFOREST VAP 5-20 CW Manuel D'installation Et Maintenance page 61

6.17. Ash removal. (Multipurpose lithium grease, NLGI: 2. Grease gun required). (5 lubrication points).
Disassemble the right-hand side and bottom rear lining. Apply, with the help of a gun, grease between the
shaft and the bearings (see drawings 35 and 36), and the chains and the sprockets (drawing 37). VAP24
(drawing 38). VAP 5-20 (drawing 39).

Bearing.

Bearing.

Chain and sprockets.

Chain and sprockets.

Bearing.

Cadena y piñones.

Rodamiento
6.18. Check all safety elements: pressure in expansion vessel, security valves (section 6.11), etc.
6.19. Purge the system, as explained in point 4.
CHECKING AT BEGINNING OF SEASON.
60

 
Drawing 35
Drawing 36
Drawing 37

Drawing 38
Figura 39