ECOFOREST VAP 5-20 CW Manuel D'installation Et Maintenance page 43

3.15. Very specific calculations must be made before starting with the set up, in case the installation process
requires an expansion vessel.
3.16. If the stove has special characteristics, like radiant floor heating or parts governed by thermostatic valves, a
buffer tank is needed to achieve the right regulation.
3.17. Depending on the material used for the hydraulic circuit, consider using an electrolytic sleeve.
3.18. It is highly advisable to perform regular checks to assess the quality of the water in the system, especially if
more water is being added. If you use a water treatment product, make sure it is compatible with the
materials used in the heating installation. To do so, please contact the product's manufacturer.
3.19. The electronic management of the supply and return temperature of the hydraulic circuit prevents the
occurrence of condensation, making unnecessary the placement of anti condensation systems.
3.20. In order to refill the stove with fuel, the user must open the hopper lid and empty the contents of the fuel
tank carefully, to prevent it from overflowing. See technical features.

Hopper lid.

Fuel.
IN CASE OF FIRE AT THE GAS OUTPUT:

The stove will shut off automatically due to over-temperature gas output.
• Call the fire department.
• Consult your dealer before restarting the stove
3.20. The appliance is intended to be permanently connected to water main with a normally closed valve; do not
use a hose-set.




42
Drawing 1



