Detachable Blower Position - Craftsman CMXEVBE176060 Guide D'utilisation

Detachable Blower Position

1. Fig G: To remove the Detachable Blower from the
Powerhead Assembly, press down on the Detachable
Blower latch under the Detachable Blower Handle
and lift the Blower off the Powerhead Assembly of the
Vac.
Fig. G
2. Fig. H: To replace the Detachable Blower onto the
Powerhead Assembly, position the Detachable Blower
above the Indented Area of the Powerhead Assembly
and align with the Rear Guides. Rotate the Detachable
Blower down until the travel of the Unit stops.
Fig. H
8
SP7092-1 12 & 16 GALLON.indb 8
Fig. I
Detachable
Blower
Handle
3. Fig. J: Lightly press down on the Detachable Blower
Handle of the Blower until you hear the "snap" of the
Detachable
Detachable Blower Latch engaging the Detachable
Blower
Blower. The Detachable Blower is now latched to the
Latch
Powerhead Assembly.
4. Your new Wet/Dry Vac is ready for use.
Fig. J
Detachable
Blower
Rear
Guides
Detachable
Blower
Detachable
Blower
Latch
Detachable
Blower
Handle
Detachable
Blower
Latch
9/13/19 9:07 AM