Installation; Caster Foot Assembly; Caster Assembly - Craftsman CMXEVBE176060 Guide D'utilisation

INSTALLATION

Caster Foot Assembly (Fig. C)
1. Remove the Powerhead Assembly from the Dust Drum
and set aside.
2. Turn the Dust Drum upside down on the floor.
3. Insert the Caster Feet into the bottom of Drum,
as shown (4 places).
4. Push on the Caster Foot until the Foot is flush with
bottom of the Dust Drum.
Fig. C
Dust
Drum
6
SP7092-1 12 & 16 GALLON.indb 6
Caster Assembly (Fig. D)
1. Insert the Caster Stem into the Socket of the Caster
Foot, as shown (4 places).
2. Push on the Caster until the Ball on the Caster Stem
is inserted all the way into the Socket. You will hear
the Ball snap into the Socket and the Caster will swivel
easily when positioning is correct.
3. Turn the Drum upright.
Fig. D
Caster
Foot (4)
Pin
Drum
Hole
Caster
Wheel (4)
Caster Stem
Caster Ball
Caster
Foot (4)
Caster Foot
Socket
9/13/19 9:07 AM