Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
HSI 90/HSI 150. How to set in concrete correctly.
4
Scope of delivery
The scope of delivery of the HSI wall inserts includes:
Single wall insert HSI 90/HSI 150-K/X
1 assembly frame, incl. protective foil with a three-ribbed seal
1 Blind cover
1 quality seal
1 Intermediate pipe for HSI 150 (with safety cover for HSI 150 single wall inserts for wall thicknesses 70-150 mm)
1 lamella plug (for HSI 150 single wall inserts from a wall thickness > 80 mm)
HSI 150-GSM single wall insert with rubber plug-in socket
1 assembly frame, incl. protective film with a three-ribbed seal
1 Blind cover
1 quality seal
1 plug-in socket for HSI 150 with three-ribbed seal
1 clamping strap for HSI 150-GSM 160/X
1 Pipe cover plug with instruction label
Double wall insert HSI 90/HSI 150-K2/X
2 assembly frames incl. protective foils, each with a three-ribbed seal
2 Blind covers
2 quality seals
1 intermediate pipe for HSI 150
HSI 150-K2-EW/X double wall insert for double/element walls
2 assembly frames, incl. protective foil, each with a three-ribbed seal and protective film
2 Blind covers
2 quality seals
1 intermediate pipe for HSI 150 with additional three-ribbed seal
5
Required tool and auxiliaries
To install the HSI 90 and HSI 150 wall inserts correctly, you will need the following tools and auxiliaries in
addition to the usual tools:
1 flexible socket spanner SLS 6G or SLS 6GD (for walls with perimeter insulation)
Accessories:
HSI-AH40 spacer (VPE 2x)
Auxiliaries:
GMT lubricant (Article number: 2790009100) for HSI 150-GSM
Legend
1
Workflow
Important information
13
EN
Publicité
Table des Matières
