Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Pipe connections for ESH/MSH-PolySafe/MSH-FW/ESH/
MSH-FUBO
Contents
1
Publishing notes ...............................................13
2
Explanation of symbols ....................................13
3
Tools and aids required ...................................... 13
4
Description of pipe connection set DN75 for
connecting to Kabufl ex/Unicor corrugated
pipe DN75 and sleeve pipe MSH/ESH .............13
5
Installation ........................................................13
6
Description of transition piece UAD75/82.5
for connection to sleeve pipe MSH/ESH and
14078 RMTX ......................................................14
7
Installation ........................................................14
8
hoses 14078 .......................................................14
9
Installation ........................................................14
10
Description of universal double sleeve
MA75-90/75-90 for connecting Hatefl ex
hoses 14078 with corrugated cable ducts
DN75 and additional mounting of sleeve
caps ....................................................................14
11
Installation ........................................................14
12
Øa = 102-125 mm and Hatefl ex spiral hoses
14070 and 14078, and also corrugated cable
ducts DN75 ........................................................15
13
Installation ........................................................15
14
and corrugated cable ducts DN75 ...................15
15
Installation ........................................................15
1
Publishing notes
Copyright © 2020 by
Hauff-Technik GmbH & Co. KG
Department: Technical Editing
Robert-Bosch-Straße 9
89568 Hermaringen, GERMANY
Tel.
+49 7322 1333-0
Fax
+49 7322 1333-999
E-mail
offi ce@hauff-technik.de
Internet
www.hauff-technik.de
Reproduction of these installation instructions - even in
extracts - in the form of reprint, photocopy, on electro-
nic data media or using any other method requires our
written consent.
All rights reserved.
Subject to technical alterations at any time and without
prior announcement.
These installation instructions form part of the product.
Printed in the Federal Republic of Germany.
14
2
1
►
1
3
For the proper installation of the pipe connections, along-
side the standard tool, the following tools and implements
are required:
4
Legend for Fig. 1
1
2
3
4
5
1
2
3
6
Art. Nr.: 5090033071
Rev.: 01/2020-01-21
Explanation of symbols
Work stages
Effect/result of a work step
Reference numerals in drawings
Tools and aids required
1 torque wrench
1 hex socket wrench A/F 7
1 hex socket wrench A/F 13
Description of pipe connection set
DN75 for connecting to Kabufl ex/
Unicor corrugated pipe DN75 and
sleeve pipe MSH/ESH
Sleeve pipe MSH/ESH
Profi le sealing ring DN75
Double sleeve DN75
Kabufl ex/Unicor corrugated pipe DN75
Installation
Insert the profi le sealing ring DN75 in the sleeve
pipe groove (see Fig. 2).
Insert two profi le sealing rings DN75 in the fi rst two
grooves of the Kabufl ex/Unicor corrugated pipe
DN75 (see Fig. 3).
Lubricate both connection surfaces with lubricant
GM.
Then push the double sleeve DN75 onto the sleeve
pipe MSH/ESH and Kabufl ex/Unicor corrugated pipe
DN75 (see Fig. 4).
The original profi le sealing rings on the Ka-
bufl ex/Unicor corrugated pipe must not be used
(see Fig. 5)
Completed connection of sleeve pipe MSH/ESH
►
with double sleeve DN75 to Kabufl ex/Unicor
corrugated pipe (see Fig. 6).
Description of transition piece
UAD75/82.5 for connection to sleeve
pipe MSH/ESH and snap-in sleeve
with Hatefl ex spiral hose 14078
RMTX
EN
Publicité
Chapitres
Table des Matières
