Other Displays - Bosch CUI100 Notice D'utilisation D'origine

English – 4​
at the same time by pressing and holding the + button (14)
on the operating unit.
If the light is switched on, a symbol is shown on the display
or in the app.
Alternatively, the light can be switched on and off using the
app.
Switching the bike lights on and off has no effect on the
backlighting of the display.
Displays and settings of the
SmartphoneHub
The SmartphoneHub is connected to the drive unit via a
cable.
The smartphone is mechanically connected to the Smart-
phoneHub via a smartphone attachment.
The communication between the SmartphoneHub and
smartphone takes place via Bluetooth®.
The SmartphoneHub has a scratch-resistant 1.52" LCD dis-
play with a resolution of 192 × 64 pixels. The integrated dis-
play is suitable for use without a corresponding smartphone.
No app content of the smartphone can be shown on the in-
tegrated display.
24
KM/H
!
a b c d e
a Error indicator:
This indicator appears when at least one error is
present in the error memory.
b Bicycle lighting indicator:
This indicator appears when the light is switched on.
c Smartphone connection indicator:
This indicator appears when a smartphone connec-
tion has been established.
The indicator flashes whenever the SmartphoneHub
is connecting to the smartphone.
d Speed:
The current speed is displayed here.
e Assistance level indicator
OFF ECO
f Unit indicator:
Depending on the settings selected in the COBI.Bike
app, the speed can either be shown in km/h or mph.
The default setting is km/h.
g Indicator for second battery:
If the eBike is equipped with 2 batteries, the 2 batter-
ies are shown here in succession.
1 270 020 XBC | (08.04.2019)
48
5
KM
18
%
f g h
TOUR SPORT TURBO
h Battery charge indicator:
Each segment corresponds to approx. 20 % of the
battery capacity.
i State of charge of the battery in per cent
j Range of the eBike battery
Depending on the state of charge of the battery, the
maximum range is shown here.

Other displays

498
!
HOLD '+' NOW
!
ENGINE OFF
D I S A B L E D
i j
68%
24 5
KM/H
!
INSPECTION DUE
x x
___
The battery is empty or not inserted.
An error has occurred.
1/1
The error indicator is displayed until
the user presses the select button (9)
to acknowledge the error. The warning
triangle subsequently remains in the
main display view (alongside speed,
etc.) until the error has been resolved.
In a two-step activation process, after
pressing the button (13), the rider is
prompted to press the + button (14)
for two seconds.
After 2 seconds, the push assistance
mode is displayed.
This indicator and the text shown on
the left appear when there are prob-
lems that mean that the drive unit can-
not provide any assistance. This is the
case if, for example:
– Incompatible components are con-
48
KM
nected to the system; or
18
%
– The eBike battery is empty.
If the eBike battery is being charged,
the screen shows the current state of
charge. The battery symbol flashes.
This indicator appears when the eBike
is connected to the DiagnosticTool.
If the state of charge of the eBike bat-
48
KM
tery is below 20 %, the battery charge
18
%
indicator h will flash.
This indicator appears when the state
of charge of the eBike battery is low.
The assistance is switched off.
These indicators appear when the
eBike is due for servicing.
This indicator appears if software
problems occur. A software update
must be carried out.
Bosch eBike Systems