Disc Operations - JVC KW-NT50HDT Manuel D'instructions

Disc operations

~
Insert a disc.
The source changes to "DISC" and playback starts.
Label side
If " " appears on the screen, the unit cannot accept the operation you have tried to do.
• In some cases, without showing " ," operations will not be accepted.
When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
To eject a disc
• You can eject a disc when playing another AV source.
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
• If the disc cannot be ejected, ☞ page 4.
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
• If a disc does not have any disc menu, all tracks on it
will be played repeatedly until you change the source
or eject the disc.
To prohibit disc ejection
A confirmation message appears.
To cancel the prohibition, repeat the same
procedure.
50
+
[Hold]