Navigation Menu Items - JVC KW-NT50HDT Manuel D'instructions

Navigation menu items

Navi Menu —Options
Menu items
Priority
Freeway/ Toll Road/ Ferry
Bypass Traffic
(Only for KW-NT50HDT)
Attention tone*
Guidance Volume*
Output*
Music Mix
Speed Alert
POI Alert
* When adjusting these items, test tone is produced.
Switches the category by pressing the corresponding tab
Selectable settings
Fastest, Shortest (☞ page 29)
Use, Avoid (☞ page 29)
Auto, Manual, Off (☞ page 35)
Select the type of attention tone, coming out before the voice guidance by
pressing [2] or [3].
Off, Normal, Prompt, A.I.
Adjust the volume of the voice guidance. (The adjustment does not affect
the audio volume.)
0 to 20; Initial 10
Select the guidance output channel (for front channel only). (This setting
does not affect the output balance (Fader setting) of AV source.)
L ch., L+R ch., R ch.
You can turn down the volume of the AV source while voice guidance is
produced.
Muting: The AV source sound does not come out.
Att.: The AV source sound is lowered.
Normal: The AV source sound is not affected.
The System sounds an alarm when you surpass the speed limit of the
current road by the set value. Press [+] or [−] to select the value. The unit
("km/h" or "mph") follows the <Scale unit> setting. (☞ page 41)
Off, 3mph (5km/h), 6mph (10km/h), 10mph (15 km/h),
15mph (25km/h), 20mph (35km/h)
Alert sounds when you approach within 0.2 mi (300 m) of a POI of the
selected category. (You can select any categories from the following; Gas
Station, Parking, Car Rental and Car Dealer & Service.)
• To select categories for POI alert, press [Edit], then select categories and
sub-categories (the selected items are marked with "✔"). To activate
POI alert for selected categories, press [On]. To deactivate it, press [Off].
40
Initial: Underlined