Transport And Storage - Festo DPA CRVZS Série Notice D'utilisation

DPA−...−CRVZS
Ensure that there is a supply of correctly prepared compressed air.
S
Take into consideration the ambient conditions at the location of use.
S
Remove the packing with the exception of the adhesive labels on the supply
S
ports (to prevent dirt from entering).
It is intended that the packaging be recycled on the basis of its constituent
materials (exception: oiled paper = other waste).
5

Transport and storage

Warning
Work loads which suddenly fall down may cause injury to people.
S Take into account the weight of the pressure booster. Depending on the
design the DPA− −CRVZS can weigh up to 30 kg.
S Do not use the regulator button as a transport support. On account of the
large mass, the regulator button may be loosened.
6 Fitting
Before fitting:
Remove the rubber buffers on the bottom of the profile plate.
S
Switch the complete system into a pressureless state.
S
20
Festo DPA−...−CRVZS 0806NH English