Get Started; Install The Batteries; Recharging The Batteries; Insert And Eject The Memory Card - Philips Digital Pocket Memo LFH 9600 Manuel De L'utilisateur

 Get started
3.1

Install the batteries

The Digital Pocket Memo can be operated with the two
rechargeable AAA batteries delivered with the product. Standard
(non-rechargeable) AAA alkaline batteries may also be used.
The Digital Pocket Memo must be in the
1
Open the battery compartment on the back of the Digital
2
Pocket Memo by sliding it outwards then folding it up.
Insert the two AAA batteries. The correct polarity is indicated
3
on the inside of the battery compartment cover.
Close the battery compartment by folding it back and sliding the
4
battery compartment cover inside until it clicks.
2
Important: Do not mix battery types! Use two rechargeable
C
batteries or two non-rechargeable alkaline batteries.
3.2

Recharging the batteries

The Digital Pocket Memo can be operated with the rechargeable
Philips AAA batteries. To recharge these batteries, use the
power supply, the Docking Station
3.2.1 Recharge the batteries using the Philips power supply
To recharge the batteries with the Philips power supply:
Connect the Philips power supply to the main power supply.
1
Connect the the Digital Pocket Memo to the Philips power supply.
2
D Note: It is okay to continue using the Digital Pocket Memo
during recharge. The batteries will be recharged while you work,
and will continue recharging even when the Digital Pocket Memo
is turned off.
3.2.2 Recharge the batteries through the USB cable
When the Digital Pocket Memo is connected to a PC or notebook
computer with the supplied USB cable, the rechargeable batteries of the
device are automatically recharged. If the USB port on the computer is
high powered, a complete recharge cycle takes about 2.5 hours. You can
keep using the Digital Pocket Memo while it is being recharged.
Important: If the USB port of the computer does not support
C
the high power standard (500 mA), disable ‚USB quick charge' in
the menu of the Digital Pocket Memo and recharge the batteries
using the power supply.
3.2.3 Recharge the batteries through the docking station
When the Digital Pocket Memo is connected to the docking
station, the device is powered by the docking station and not by the
batteries. If the Digital Pocket Memo is operated with rechargeable
batteries, the batteries are automatically recharged while the Digital
Pocket Memo is connected to the docking station.
Important: The Digital Pocket Memo may become warm during
C
fast recharging.
User manual
OFF position.
1
Philips
or the USB cable.
3.3 Activate the Digital Pocket Memo
The Digital Pocket Memo is turned on and off by sliding the
switch (13). When using for the first time, you will be prompted to
set the language, date and time.
3.3.1 Set the language
When using for the first time, you will be prompted to set the
language.
Press the + and - buttons (5) on the Digital Pocket Memo to
1
select a language.
Press the OK smart button (2a) to confirm your selection. The
2
selected language will be displayed.
D Note: It is also possible to change the language later using the
menu. See Change the language
3.3.2 Set the date and time
After selecting the user interface language, the Digital Pocket Memo
will prompt you to set the current date and time.
Press the + or - button (5) repeatedly to change the value for
1
the year, month or day.
→
Press the smart button (2b) to advance the arrow (↑) to the
2
next entry.
After setting the day, press the
3
settings to the correct time.
Press the + or - button to select 12-hour or 24-hour notation,
4
AM or PM (if 12-hour notation is selected) and to change the
value hour and minute settings.
→
Press the smart button to confirm that the date and time is
5
correct. The Digital Pocket Memo is now ready to function.
D Note: If a mistake is made in the date/time settings, use the
smart button (2a) anytime during the procedure to step back to
make corrections. It is also possible to change the date and time
later using the menu. See Set the date and time
more information.
3.4

Insert and eject the memory card

The Digital Pocket Memo operates with an SD (SecureDigital)
memory card and supports SD cards with storage capacities of
up to 2 GB. See Change the recording format
information on the available formats and recording times.
Your Digital Pocket Memo is packaged with a memory card already
inserted and formatted.
To eject the memory card:
Locate the memory card slot on the top back side of the Digital
1
Pocket memo (17).
Press the memory card in the Digital Pocket Memo until it clicks.
2
Release the memory card. It will slightly emerge from the
3
memory card slot. Simply slide it out.
ON/OFF
on page 14 for more information.
→ smart button to advance the
←
on page 16 for
on page 14 for more
7