Detailed Midi Implementation - Viscount Cantorum Duo Mode D'emploi

Manuale Utente

10.6 DETAILED MIDI IMPLEMENTATION

CHANNEL MESSAGES
Using default settings, channel messages are sent
and received on the following MIDI channels:
-
Ch.1: Manual II notes or controls
-
Ch.2: Manual I notes or controls
-
Ch.4: Pedal notes or controls
Ch.16 is a reserved channel (system)
Note On
Message which is generated when a key is
pressed.
Data format: 9nH kkH vvH
n=channel number
kk=note number
vv=note on velocity
Note Off
Message which is generated when a key is
released.
Data format: 8nH kkH vvH
9nH kkH 00H
n=channel number
kk=note number
vv=note off velocity :00H–7FH (0–127)
-
This message can be also received as Note
On with velocity=0.
Control Change
Messages to control volumes, expressions and
other system controls.
Bank Select MSB (CC 0)
•
Controller transmitted
Program Change and Bank Select LSB in order
to select a specific bank of sound. It can be
transmitted using the COMBIN. PRG function
and when stored in the combinations and Tutti.
It also can be received on channel 16 to select
the Memory Bank.
Data format: BnH 00H vvH
n=channel number
vv=bank MSB number
:0H–EH (1–15)
:1EH–65H (30–101)
:01H–7FH (1–127)
:00H (0) Note Off
:0H–EH (1–15)
:1EH–65H (30–101)
ignored
in combination
:0H–EH (1–15)
:00H–7FH (0–127)
Volume (CC 7)
•
Message which controls the sections volume.
Data format: BnH 07H vvH
n=channel number
vv=volume value
Expression (CC 11)
•
Message which controls the sections expression.
Data format: BnH 0BH vvH
n=channel number
vv=expression value
Bank Select LSB (CC 32)
•
Controller
Program Change and Bank Select MSB in order
to select a specific bank of sound. It can be
transmitted using the COMBIN. PRG function
and when stored in the combinations and Tutti.
Data format: BnH 20H vvH
n=channel number
vv=bank LSB number
Sustain (CC 64)
•
Message which controls the Sustain / Damper
effect.
Data format: BnH 40H vvH
n=channel number
vv=switch
All Sounds Off (CC 120)
•
Terminates all voices currently on for the specific
channel.
Data format: BnH 78H 00H
of
n=channel number
Reset All Controllers (CC 121)
•
Controllers are set to the default value.
Data format: BnH 79H 00H
n=channel number
- This message is transmitted only.
IT - 50
:0H–EH (1–15)
:00H–7FH (0–127)
:0H–EH (1–15)
:00H–7FH (0–127)
transmitted in combination
:0H–EH (1–15)
:00H–7FH (0–127)
:0H–EH (1–15)
:00H (0) off
(received as 00H-39H)
:7FH (127) on
(received as 40H-7FH)
:0H-EH (1–15)
:0H–EH (1–15)
of