KERN SFB Série Mode D'emploi page 84

How to carry out an adjustment:
 Confirm menu setting „noLin" by
Ensure that there are no objects on the weighing plate.

Wait for stability display, then press

The currently set adjustment weight will be displayed.

To change by using the navigation buttons (see chap. 2.1.1)
select the desired setting, the active digit is flashing.
 Acknowledge with

Carefully place adjusting weight in the centre of the weighing
plate. Wait for stability display, then press

After the adjustment the balance will carry out a self-test.
Remove adjusting weight during selftest, balance will return
into weighing mode automatically.
An adjusting error or incorrect adjusting weight will be
indicated by the error message; repeat adjustment
procedure.
24
.
.
.
.
SFB-BA-e-1630
