Display Options - Diehl CORONA E Guide D'installation

Activating wireless
Wireless can be activated using the button in the main
loop after the display test.
Dependent on the version, either Open Metering or the
Real Data radio protocol is programmed.
Open Metering
Real Data
Deactivating via the button is no longer possible
after activation.
The wireless system can only be deactivated via
the optical interface with IZAR@SET at the Expert user level.
In the standard delivery state, wireless is deactivated.
6.

Display options

6.1 LC DISPLAY
The LC display can be manually switched to the next dis-
play using the mechanical key.
The display switches off automatically and changes to the
power save mode if the button is not pressed for 4 min-
utes. The meter continues measuring without a fault.
- 30 -
Button press > 3 sec
Button press > 3 sec
Deutsch
English
Français