Diehl CORONA E Guide D'installation page 27

Deutsch
English
5.3 Pulse outputs and pulse sequences
Input voltage
Input current
Voltage drop at the active output max. 2 V / 27 mA
Current through inactive output
Max. reversed voltage without
destruction of the outputs
Pulse duration
Pulse break
Pulse frequency
The lowest pulse weight of a meter can yield a
pulse frequency greater than 10 Hz. These fre-
quencies are suitable for conversion into ana-
logue signals. If the meter is to be operated with
system components (e.g. wireless module with pulse out-
put), the next higher pulse weight must be set.
The pulse values can be configured as desired in the
specified value range.
Français
max. 30 V
max. 27 mA
max. 5 μA / 30 V
6 V
min. 5.5 ms (at max. pulse
frequency 90 Hz)
min. 5.5 ms / max. 2.0 s
max. 90 Hz
- 27 -