Eliminating Blockages - BDS Maschinen AkkuMAB 3000 Mode D'emploi

Eliminating blockages

AkkuMAB 3000
WARNING
Danger of cut injuries from broken tool parts or swarf.
►
Always remove the rechargeable battery from the machine in
order to avoid unintentional starting.
►
Put protective gloves on before starting work.
Blockages caused by a broken tool:
‹
Switch off the machine. Remove the rechargeable battery.
‹
Use the handle to move the machine slide to the upper posi-
tion.
‹
Replace defective tool. Remove swarf.
Other blockages:
‹
Switch the machine off using the motor switch. Leave the mag-
netic clamp switched on.
‹
Use the handle to move the machine slide to the upper posi-
tion.
‹
Remove swarf and check tool.
Eliminating blockages
51