BFT DEIMOS BT Instructions D'utilisation page 13

Press the OK key
Control unit software version
N. total manoeuvres (x 100)
N. manoeuvres since latest maintenance (x 100)
N. radio control devices memorised
- +
- +
- +
- +
ACCESS TO MENUS Fig. 1
+/-
OK
OK
DIAGNOSTICS
CODE
OK
OK
OK
OK
* = 0,1,...,9,A,B,C,D,E,F
35.40
See PARAMETERS MENU
See LOGIC MENU
See RADIO MENU
OK OK
DIAGNOSTICS and WARNINGS
DESCRIPTION
pedestrian input activated
START input activated
STOP input activated
attivazione ingresso PHOT
SAFETY EDGE input activated
tested photocell FAULT input
activated
CLOSE input activated
OPEN input activated
opening limit switch input
activated
closing limit switch input activated
software thermal cutout activated allow automated device to cool
reverse due to obstacle
photocell test anomaly
safety edge test anomaly
hardware anomaly
*
* communication anomaly
Set torque threshold
Maximum instantaneous motor torque
Scroll up
Scroll down
Confirm/Switch on display
Exit Menù
NOTES
make sure movement is not hindered
check photocell connection and/or
parameter/logic settings
check safety edge connection and/or
parameter/logic settings
check connections to motor
check connection with accessory
devices and/or expansion boards or
serial-connected devices
DEIMOS BT-MA -
13