Aspire Cygnet Revvo Set Manuel D'utilisation page 67

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the Device
Please note the following:
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit
in the liquid-filled tank for around 15 minutes after installation before you start va-
ping. To do this, please turn the clearomizer upside down. Don't clean the atomizer
head with water. If necessary, simply wipe with a dry cloth Since atomizer heads
are disposable, they must be replaced regularly.
Changing the Glass Tank
1. Remove the clearomizer from the battery/carrier of your e-cigarette.
2. Screw the glass protective ring counterclockwise from the glass tank while the
mouthpiece points downwards.
3. Using a light twisting motion, remove the old glass tank from the base hardware
and insert a new one.
4. Reaffix the glass protective ring and make sure that no e-liquid can escape.
5. Reconnect the clearomizer to the battery/mount.
65

Publicité

Table des Matières
loading

Table des Matières