Selecting The Backlight Mode; Attaching To A Camcorder - Sony WRR-861A Mode D'emploi

Selecting the Backlight Mode

You can select the backlight mode of the display.
1
Press the MODE button until the backlight mode appears.
2
Press the SET button.
The backlight indication starts flashing.
Backlight mode
3
Press the + or – button to select the desired mode.
BL OFF : Lights off all the time
BL ON : Lights on all the time
BL AT : Lights on when you begin to operate the
tuner. Turns off automatically 15 seconds
after you finish operation.
4
When the desired mode appears, press the SET button.
The display stops flashing and the selected mode is now
stored in memory.

Attaching to a Camcorder

Sony lithium-ion battery pack
Mounting bracket optional
(A-8278-057-A)
When the Sony lithium-ion battery pack is attached on the
camcorder, both the mounting bracket optional (A-8278-
057-A) and the mounting plate supplied are required. When
attaching the Sony nickel-cadmium battery, use only the
supplied mounting plate.
To release the tuner from the mounting plate, push in the
lever on the plate.
Mounting plate supplied
13
(US)