Preparations; Mounting To A Portable Tuner Mount Adapter - Sony WRR-855A Mode D'emploi

Preparations

Mounting to a Portable Tuner Mount
Adapter
This section shows you how to mount the
WRR-855A/855B to the BTA-801 Portable Tuner Mount
Adapter for example.
By properly mounting the WRR-855A/855B to the
BTA-801 and attaching the two supplied antennas, a
weatherproof structure is obtained.
Before mounting
Be sure to clean the abutting surfaces of the
WRR-855A/855B and the BTA-801 before mounting.
Procedure for mounting to the BTA-801
1
Observing the direction, insert the WRR-855A/855B in
the BTA-801.
2
Push the WRR-855A/855B until the accessory connector
clicks into place.
3
Run in the four mounting screws little by little in turn to
gradually secure the units together, then tighten them.
WRR-855A/855B
BTA-801
7
(GB)