Playing Tracks In Random Order (Shuffle Play); Playing Tracks In The Desired Order (Programme Play) - Sony HCD-T1 Mode D'emploi

Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on the CD in
random order. Use the buttons on the
remote to do this operation.
Tuner CD Player
POWER → ON
GB
8
1
Press 6 (open/close) and place a CD on
the CD tray.
2
Press TUNING/PLAY MODE
repeatedly until "SHUFFLE" appears in
the display.
3
Press (.
"J" appears and then all the tracks play
in random order.
To cancel shuffle play
Press TUNING/PLAY MODE.
"SHUFFLE" disappears, and tracks
continue playing in their original order.
If you press TUNING/PLAY MODE during
normal play
You can play all the tracks on the CD in
random order.
To skip an undesired track
Press +.
You cannot go back to the preceding track by
pressing =.
Chapter 2: the CD Player
Playing Tracks in the
Desired Order
(programme play)
You can programme up to 24 tracks to play
in any order you choose. You can do this
by designating the tracks in the order you
want them to play.
Tuner CD Player
POWER → ON
6
3
6
2
2
1
Press 6 (open/close) and place a CD on
the CD tray.
2
Press TUNING/PLAY MODE
repeatedly until "PGM" appears in the
display.
3
Press = or + until the desired track
number is displayed.
The total playing time including the
chosen track flashes in the display. (The
programme is not entered at this time.)
4
Press ENTER.
The programme number appears for
about a second, and the total playing
time lights up.
5
Repeat steps 3 and 4 to programme the
remaining tracks you want to play in the
order you want them to play.
6
3
4
Track number
TUNED MONO AUTO MANUAL
STEREO PRESET
SHUFFLE MEMORY
4
PGM
SURR 12
REPEAT 1 DBFB 12
3 0 4
DAILY REC SLEEP kHz MHz
Total playing time
6
Press (.
All the tracks you chose play in the
order you designated.
To cancel the programme play
Press TUNING/PLAY MODE until "PGM"
disappears.
To change the programme
To Operation
Add a track at During stop, do steps 3 –
the end of the 5.
programme
During stop, press p on
Erase the entire
programme the player.
After all the programmed tracks have
been played
The programme order remains in the CD
player's memory. You can listen to the same
programme by just pressing (.
Notes
• Once you open the CD tray, the programme
is erased.
• If the total programme time has exceeded
100 minutes, the order of the programme is
displayed instead of the total playing time.
• If you try to programme more than 24
tracks, "FULL" is displayed.