Useful Information About The Baby Monitor; Maintenance And Cleaning; Important - Inanny NM204 Manuel D'utilisation

8. Useful information about the baby monitor

•
If you operate the parent unit with the battery, this minimises electrosmog from
electrical and magnetic alternating fields.
•
You can increase the range of the baby monitor by positioning the camera as
high up as possible near a door or window and by ensuring that the battery is not
too weak.
•
Other radio waves may possibly interfere with the transmission of the baby monitor.
Therefore, do not position the baby monitor near devices such as microwaves,
WLAN, etc.
•
The following other factors can interfere with the baby monitor's transmission or
shorten its range: furniture, walls, houses, trees, environmental factors ( such as fog,
rain).

9. Maintenance and cleaning

The service life of the camera and the parent unit depend on careful handling.

IMPORTANT

•
Remove the battery from the parent unit if the video baby monitor is not in use for
an extended period.
•
You will get the maximum capacity from your battery if you run down the battery
at least once every six months. To do this, disconnect the parent unit from the
mains and run the battery down through normal use. Then fully charge the battery
up again.
•
The maximum battery capacity can only be reached after it has been charged
several times and is dependent on many factors (battery state, ambient
temperature, and frequency of charging, etc.).
•
Protect the camera and the parent unit from knocks, damp, dust, chemicals,
drastic changes in temperature, electromagnetic fields and nearby sources of
heat (ovens, heaters).
•
Clean the camera/parent unit with a soft, dry cloth. Do not use any abrasive
cleaning products.
10