Instruction Manual - Gardigo 78302 Mode D'emploi

MARTEN-FREE MOBILE
Instruction manual
Art.-No. 78302
1. Product description
The innovative mobile protection against martens from
Gardigo. Battery-operated, mobile and highly effective.
You won't have to get upset by unwanted visits by martens
on your premises. Gardigo Marten-Free Mobile keeps the
bad-tempered pests away from your car, house, garage,
barn, loft or arbour. Immediately ready for use, no power
connection and no assembly necessary. The integrated
60-second interval switching prevents the martens from
getting used to the sound. Without the need for bother-
some cabling, this new device from Gardigo can now be im-
mediately used in all imaginable places. Place. Switch on.
Marten-free. It can be attached in a vehicle with the sup-
plied cable ties or with screws. Depending on the battery,
permanent operation of at least 6 months.
2. Operating mode
New electronics means minimal power consumption. The
device emits high-frequency sounds lasting 60 seconds at
60-second intervals. These sounds that are hardly percep-
tible to the human ear keep the martens away from the ve-
hicle and rooms. It protects cables, wires and other rubber
parts from marten bites. Please be aware that the appli-
ance will possibly start in pause mode and will then switch
into power mode. There is no technical fault.
Notice: If a vehicle or rooms have already been visited by
martens, the animals have most probably left their territo-
rial markings. These odours must be removed prior to the
installation of the marten-free device (in a vehicle prefe-
rably by driving through a car wash).
Caution! If you want to use the Marten-Free Mo-
bile in your car, please note that it must be dis-
mantled prior to the car being washed!
3. Scope of delivery
• 4 x cable ties

• Instruction manual

4. Technical data
• Battery-operated: 4 x C (LR14) (not included)
• Power consumption: 1 mA, in standby 20 µA
Status LED
• 2 x fixing screws
• Effective range: approx. 40 m² (in closed rooms)
• Frequency: 12 kHz +/– 10 %, approx. 78 dB
• Output frequency: Periodic (every 60 seconds on and off)
• Displays: LED indication (periodic)
• Fasteners: 4 cable ties (210 mm)
5. Replacement of the battery
1. Remove the housing cover. (1)
2. Remove the old battery from its fitting.
3. Insert four new batteries size Mono (C). When doing so,
mind the correct polarity as shown on the bottom inside
the battery fitting.
4. Reattach the casing cover to the casing body with a au-
dible click into place and screw it.
6. General information
1. Electric appliances, packaging material etc. should be kept
away from children.
2. Dispose packaging and worn out material correctly and in
an environmentally friendly way.
3. Do only pass on the device including the operation manual.
4. Subject to change of design and technical data without
notice for the sake of constant product improvement.
Note: The response of each animal to our devices may vary.
The development of our devices, methods and application tips
are based on experience, testing and feedback from our custo-
mers. Therefore the devices are successful in most cases.
Status: 12/18
1
5