Setting The Clock; Selecting The Display - Panasonic Rx-Ed707 Manuel D'utilisation

Setting the Clock
L
The clock has a 12-hour display.
Example: Setting the clock to 4:20 P.M.;
H Press [POWER (•)/!].
(This turns the unit on.)
pj
Press [TOP PANEL OPEN A] to open top panel.
El
Press [ADJUST, CLOCK/TIMER].
"CLOCK" is displayed.
F| Press [+] or [—] to show desired time.
The time display can be changed in one minute units by tap¬
ping the buttons, and quickly by holding down the buttons.
While the time display is flashing,
Press [ADJUST, CLOCK/TIMER].
The clock now starts operating, and the display returns to its
original status.
To display the clock (When the unit is on): 0
(Available only from the remote control)
Press [DISPLAY] when the unit is on.
Selecting the Display
0
(Only from the remote control)
Press [DISPLAY] when the unit is on.
The display changes each time the button is pressed.
•When using the cassette
® Tape counter
(b) Present time
•When using the radio, CD or external unit
© Frequency/play status
© Present time
© Tape counter
"-" appears on the tape counter display when a cassette
has not been inserted.