Easy Cd Recording (Auto) - Panasonic Rx-Ed707 Manuel D'utilisation

Easy CD recording (Auto)
Recording all tracks or programmed tracks of a CD in pro¬
grammed order.
• It is not necessary to rewind the cassette. Recording always be¬
gins from the beginning of the side facing up.
• If the side ends in the middle of a track, the track which was cut off
is recorded on the opposite side from the beginning.
Getting ready: insert the CD.
n Press [■ TAPE/CD] to select the CD mode.
Press [CD REC MODE] to display "AUTO".
AUTO—»1 -REC—OFF
t_I
(The display changes each time the button is pressed.)
The necessary tape length will be displayed. (Example: Tape
of 51 minutes or more necessary to record all tracks.)
Insert a cassette which is longer than that dis¬
played in step Q.
Insert with the side to be recorded first up.
Q Press [•/•!! REC/REC PAUSE].
Automatically rewinds, and recording from the first track begins
after a 10 second interval.
Reverse mode is displayed as "^y.
© Rewinding tape
© Recording 10 second interval
© Recording begun
The unit stops when recording finishes.
To stop recording (CD will also stop):
Press [■
TAPE/CD].
To record favourite tracks:
Program desired tracks (-» steps Q to Q on page 12) after
step Q.
KIWI
•Auto CD recording cannot be used in combination with random
play (• page 11).
•"C—" is displayed if the tape required for recording exceeds
120
minutes.
RQT4598
I_