Contest OCTODANGLE Guide De L'utilisateur page 15

5 - Internal menu
5.1 - Menus and functions
Your projector will perform a position initialisation and show the software version.
Once the initialisation has been completed, press ENTER to access the menu.
You can choose the different functions with the UP and DOWN knob as the diagram below
UP/DOWM
UP/DOWM
5.2 - functions description
FUNC UP
Aut 0 Beam+Flash
Aut 1 Beam
Aut 2 Flash
Auto
Sou 0 Beam+Flash
Sou 1 Beam
Sou 2 Flash
Sound
It's work will follow the procedure in host device
SLAVE
by DMX signal
1CH (d001-d512)
DMX
6 CH (d001-d507)
UP/DOWM
UP/DOWM
UP/DOWM
DOWN
OCTODANGLE - LEDs multi beams light DJ effect
ENTER
into speed choice
UP/DOWN to choose display speed.
S 1 is fastest
S100 is slowest
S 0 is defualt
Confirm choice, adjust sensitivity by potentiometer
LED letter strobes means DMX signal or SLAVE signal is
not connected well, please check cable, control panel and
other equipments.
UP/DOWM
ENTER
confirm
Page 15