Data And Key Characteristics Easyclean100 - Mettler Toledo EasyClean 100 Instructions D'utilisation

8
© 11/14 Mettler-Toledo AG, CH-8606 Greifensee
Printed in Switzerland

1.3 Data and key characteristics EasyClean100/150

Housing
Weight of control unit
Protection rating
Ambient conditions
Power supply
System control
Control input
Transmitter
Electrical connections
Connection transmitter
Cable ducts
Compressed air supply
steel housing, powder-coated with polyester resin
material: mild steel DIN 1.1203 Ck55
attention: housing may not be cleaned with solvents
containing acetone
approx. 3 kg (6.6 lb)
IP65
temp. in operation:
temp. storage/transportation: –10 – +70°C (+14 – +158°F)
degree of pollution:
overvoltage category:
100 – 230V AC, 50/60 Hz, 0.18 – 0.3 A (± 15%)
process initiation:
– via a wash contact in the associated transmitter
sequence:
– can not be set on unit
1 control input for wash contact in transmitter 24V
METTLER TOLEDO transmitters:
– pH2050e, O 4050e, Cond7050e
2
– pH2100e, O 4100e, Cond7100e, Trb8300
2
– alternatively via any standard transmitter with wash
contact and "hold" function
Terminal strip 0.08 – 2.5 mm
4-wire control cable, 4 x 1.5 mm
length: 5 m (optional 10 m)
Ø 3.5 to 10 mm => M 16
4 – 8 bar (400 – 800 kPa, 58 – 116 psi)
– air quality according to ISO 8573-1
– moisture class 4 (water dew point +3°C)
– particles class 5 (filter 40 µm)
– max. oil content class 2 (0.1 mg/m
1
connection: thread G / "
8
EasyClean100/150
0 – +45° C (+32 – +113°F)
2
III
2
2
3 )
EasyClean100/150
52 500 178