Safety; Introduction; Intended Use; Inappropriate Use - Mettler Toledo EasyClean 100 Instructions D'utilisation

10

2 Safety

© 11/14 Mettler-Toledo AG, CH-8606 Greifensee
Printed in Switzerland

2.1 Introduction

This instruction manual lists the main points of how to use the EasyClean100/150 efficiently,
in the intended manner. For safe, trouble-free operation, operators must be aware of these
safety instructions and comply with further warning notices in the instruction manual.
This instruction manual, and the safety requirements in particular, must be observed by the
operator and all other persons working with the EasyClean100/150. Compliance with local
regulations and statutory requirements is also essential.
The instruction manual must always be stored close at hand, in a place accessible to all
people working with the EasyClean100/150.

2.2 Intended use

EasyClean100 and EasyClean150 are intended solely for automatically controlled or manually
flushing of sensors, as described in this instruction manual.
Other prerequisites for appropriate use include:
– observing the instructions, notes and requirements set out in this instruction manual
– observing the prescribed inspection and maintenance intervals
– correct care and maintenance of the unit, according to the instruction manual
– observing the prescribed environmental and operational conditions, and permitted
installation positions.
– compliance with local statutes

2.3 Inappropriate use

Any other use, or use not mentioned here, that is incompatible with the technical specifications
is deemed inappropriate. The operator is solely responsible for any damage arising from such
use.
The following are deemed particularly inappropriate:
– use of hydraulic fluid in place of compressed air
– use of suspensions as cleaning media
EasyClean100/150
EasyClean100/150
52 500 178