VOLTCRAFT V-CHARGE ECO 6X 1S Notice D'emploi page 57

If the input voltage on the charger is too low, the charg-
ing process is aborted and a beep is emitted.
If the battery is connected to the charging channel with
reverse polarity, charging is not possible.
If the charger detects an excess voltage at the output of
the charging channel, the charging process is aborted
and the LED indicator flashes.
• The display shows the charging channel with corresponding
battery type and battery voltage in succession (depending on
how many batteries are connected; unused charging channels
are skipped):
"1–P", "2–P", "3–P", "4–P", "5–P", "6–P": Number = charging
channel number, "P" = LiPo battery
"1–H", "2–H", "3–H", "4–H", "5–H", "6–H": Number = charging
channel number, "H" = LiHV battery
• When the battery is fully charged, the LED indicator lights up
green continuously. The charger also emits a beep. In addition
to the display of the charging channel with corresponding bat-
tery type (see above), "FUL" is displayed. The fully charged bat-
tery may now be removed.
If the charging process ends early, simply disconnect the
battery from the charger.
57