Télécharger Imprimer la page

Parkside Performance PSSAP 20 Li C4 Instructions D'utilisation Et Consignes De Sécurité page 40

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
Do not charge non-
 
rechargeable batteries.
Disregarding this instruction is
hazardous.
If the supply cord is damaged,
 
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Protect the electrical parts
 
against moisture. Do not
immerse such parts in water
or other liquids to avoid
electrical shock. Never hold the
appliance under running water.
Pay attention to the instructions
provided for cleaning,
maintenance and repair.
The appliance is suitable for
 
indoor use only.
ATTENTION! This charger is
 
only designed for charging the
battery pack types:
Parkside 20 V
battery pack
PAP 20 B1
PAP 20 B3
PAPS 204 A1 4 Ah 5 cells
PAPS 208 A1 8 Ah 10 cells
An up-to-date list of battery
 
compatibility can be found at
www.lidl.de/akku.
2 Ah 5 cells
4 Ah 10 cells
˜ Before first use
˜ Accessories
To operate this product safely and correctly, the
following accessories, i.e. tools and saw blades,
are necessary:
Suitable saw blade
 
Accessories and saw blades are available
through your authorised dealer. When buying
always consider the technical requirements of this
product (see "Technical data").
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer.
NOTE
This instruction manual contains information
u
and suggestions for several saw blades and
their uses. The saw blades depicted are
not necessarily included in the shipment,
but are meant to indicate additional
possibilities for using this product.
Suitable battery packs and chargers
Battery pack: Parkside X 20 V Team
Charger:
Parkside X 20 V Team
˜ Operation
˜ Attaching/removing the
battery pack
Removing the battery pack: Press the
 
battery pack release button
battery pack
(Fig. D).
8 ]
[
Attaching the battery pack: Align the
 
battery pack
to the handle and slide it into
[
8 ]
it. Ensure it clicks noticeably in place.
NOTE
If the battery pack
u
the product and the on/off switch
pressed for the first time, the connection
status LED
flashes 3x.
[
]
. Remove the
[
]
is inserted into
8 ]
[
is
6 ]
[
GB/IE
39

Publicité

loading

Ce manuel est également adapté pour:

391001 2201