Operating And Display Elements; Displayed Symbols; Control Panel Keys - Hettich HAEMATOKRIT 200 Mode D'emploi

EN
14

Operating and display elements

>RCF< RPM
RPM/RCF
14.1

Displayed symbols

Lid unlocked.
Lid locked.
Rotation display. The rotation display lights up, rotating counterclockwise, as long as the rotor is turning.
14.2

Control panel keys

 Input the speed directly.
RPM/RCF
If the key is kept pressed, the value changes with increasing speed.
 Input the runtime directly.
t
Adjustable in steps of 1 second up to a minute, and in steps of 1 minute starting from 1 minute.
 Input the centrifuging parameters.
If the key is kept pressed, the value changes with increasing speed.
 Selection key for activating the individual parameters.
SELECT
Every time the key is pressed, the next parameter is activated.
 Switching between the RPM display (RPM) and RCF display ( RCF ).
RCF
RCF values are displayed in parentheses
RPM Speed
RCF : Relative centrifugal acceleration
 Start the centrifugation run.
START
PULSE  Short-term centrifugation.
Centrifugation is run as long as the key is kept pressed.
 Finish the centrifugation run.
STOP
OPEN
The rotor runs down with a pre-selected brake stage.
Pressing the key twice triggers the Emergency Stop.
 Unlock the lid.
48/129
t/min:s
START
RCF
PULSE
t
STOP
SELECT
OPEN
.