Diono monterey 5 iST FixSafe Manuel D'instructions page 9

INSTALLATION
WARNING! If your vehicle is equipped with lower anchors,
Diono always recommends installation utilizing the ISOFIX
connectors with this booster seat.
To improve safety and performance, this booster seat is equipped with
a lower anchorage system that allows secure attachment to a
vehicle's lower anchor locations.
1. Extend ISOFIX connectors from booster seat by pressing ISOFIX
release button on front of seat.
1
2. Place the seat in the vehicle and align the
ISOFIX connectors to the vehicle's lower
anchors.
3. Attach both ISOFIX connectors to the vehicle lower anchors.
The ISOFIX lock indicator will change from
the connectors "click" locking to the vehicle lower anchors.
16
monterey 5
2
RED to GREEN when
3
NOTE: Even with ISOFIX connectors properly attached, child seat will still
have movement against the vehicle seat back and bottom.
4. With ISOFIX connected to vehicle lower
anchors, push the seat bottom towards the
vehicle seat back until seat back touches
vehicle seat. A gap is acceptable as long as the
head support is touching the vehicle seat back or
headrest.
IMPORTANT: Do not use ISOFIX if installation interferes with
vehicle seat belt. If not using ISOFIX installation, secure this booster
seat using vehicle seat belt even when not occupied. In a crash, an
unsecured restraint can cause injury to other vehicle occupants.
IMPORTANT: When using booster seat in center seating position, make
sure it is stable and does not rock from side to side.
DISENGAGING LOWER ANCHOR INSTALLATION
Press the ISOFIX release button on front of booster seat and pull away
from vehicle seat back.
Push ISOFIX release button while pushing ISOFIX connectors in
towards seat bottom to store.
INSTALLATION
4
diono.com
17