Safety Instructions For Hedge Trimmers; Additional Safety Instructions - Parkside Performance Pphsa 40-Li B2 Traduction Des Instructions D'origine

GB MT
Safety instructions for hedge
trimmers
a) Keep all body parts away from
the blade. Do not attempt to re-
move clippings or to hold onto
material to be cut when the
blades are running. The­blades­con-
tinue to move after turning off the switch.
A moment of inattention when using the
trimmer­can­result­in­serious­injuries.­
b) Hold the hedge trimmer by the
handgrip when the blade is at
a standstill and make sure you
do not press the switch. Carrying
the hedge trimmer correctly reduces the
risk­of­inadvertent­operation­and­being­
injured­by­the­blade­as­a­result.­
c) Always place the protective cov-
er onto the blades while trans-
porting or storing the hedge
trimmer.Careful handling of the
hedge­trimmer­reduces­the­risk­of­injury­
from the blade.
d) Ensure that all switches are
turned off and the battery is
removed or switched off before
removing jammed clippings or
maintaining the machine. Unex-
pected­operation­of­the­hedge­trimmer­
when­removing­jammed­material­can­
lead­to­serious­injuries.­
e) Hold the hedge trimmer only by
the insulated gripping surfaces
as the cutting blades may come
into contact with hidden wiring.
The blades coming into contact with a
live wire can also cause a charge in
metal­parts­of­the­appliance­and­result­
in an electric shock.
f) Keep all mains cables and lines
away from the cutting range.
Cables and lines may be concealed in
hedges­and­bushes­and­be­inadvert-
32
ently cut by the blade.
g) Do not use the hedge trimmer in
bad weather, especially if there
is a danger of a storm. This­reduc-
es the risk of being struck by lightning.

Additional safety instructions

• Before working, search the
hedge for hidden objects, e.g.
wire fences etc.This­will­help­you­to­
avoid damaging the device.
• Hold the hedge trimmer correct-
ly, e.g. with both hands on the
handgrips if two handgrips are
provided. Losing control of the device
can­result­in­injuries.
• Always wear appropriate protec-
tive equipment and work gloves
while working with the device.
Never hold or pick up the device
by the cutting blade. Contact with
the­cutting­blade­can­lead­to­injuries.
For­your­personal­safety:­Wear­sui-
table work clothing, such as sturdy
shoes­with­non-slip­soles,­long,­ro-
bust trousers, gloves, safety goggles
and­ear­protection!
Do­not­wear­long­clothing­or­jewel-
lery,­as­it­can­become­jammed­in­
the­moving­parts.­Never­use­the­device­ba-
refooted­or­wearing­open­sandals.
• The device is intended for trim-
ming hedges. Do not cut branch-
es, hard wood or anything else
with the device.The device could
become damaged.
• Do not attempt to release a
blocked/jammed safety cutter
bar before turning off the power
and removing the battery.There is
a­risk­of­injury.