Maintenance, Cleaning; Safety Instructions; Maintenance Work - Burkert 2030 Manuel D'utilisation

Type 2030, 2031, 2031 K, 2032,
2033, 2037

Maintenance, Cleaning

10. MainTenance, cleaning
10.1. safety instructions
Danger!
risk of injury from high pressure in the equipment!
• Before loosening the lines and valves, turn off the pressure and vent the lines.
risk of injury due to electrical shock!
• Before reaching into the system
• Observe applicable accident prevention and safety regulations for electrical equipment!
Warning!
risk of injury from improper maintenance!
• Installation may be carried out by authorized technicians only and with the appropriate tools!
risk of injury from unintentional activation of the system and an uncontrolled restart!
• Secure system from unintentional activation.
• Following maintenance, ensure a controlled restart.
10.2. Maintenance Work
10.2.1. actuator
The actuator of the diaphragm valve is maintenance-free provided it is used according to these operating
instructions.
10.2.2. Wearing parts of the diaphragm Valve
Parts which are subject to natural wear:
• Seals
• Diaphragm
→
If leaks occur, replace the particular wearing parts with an appropriate spare part.
(see Chapter 13.Spare Parts).
A bulging PTFE diaphragm may reduce the flow-rate.
, switch off the power supply and secure to prevent reactivation!
english
27