Door reversal instructions
Your refrigerator is built with a reversible door. You have the choice of either opening it from the left
or the right side. In order to reverse the opening direction of your door, please follow these simple
instructions.
1. Make sure that your refrigerator is unplugged.
2. Pry the hinge cover up and off, remove the three
screws that secure the upper hinge to the door, then
remove the hinge.
3. Remove the refrigerator compartment door from the
cabinet.
4. Remove the two screws that secure the center hinge.
5. Remove the freezer compartment door.
6. Remove the screws that secure the lower hinge to the right side
of the cabinet, then remove the hinge.
7. Remove the washer and nut that secure the pin shaft to the right hole
on the lower hinge, then remove the shaft.
8. Insert the pin shaft into the left hole on the lower hinge, then secure
the shaft with the washer and nut.
9. Install the lower hinge on the left side of the cabinet.
10. Remove the screw that secures the door stop from the bottom
right of the freezer compartment door, then remove the door
stop and install to the bottom left side.
36