Connecting The Monitor - Medion AKOYA P55015 Mode D'emploi

Connecting the monitor

• Prepare your computer for the monitor as necessary so that the correct settings are available for
your monitor.
• Make sure that the monitor is not connected to the mains (mains plug is not yet inserted) and the
monitor and the computer are not switched on.
Note
Only one type of connection can be used at the same time.
Connecting the signal cable
• Connect the signal cable to the matching VGA, DVI or HDMI connections on the computer and
the monitor.
Connecting the audio cables
• Connect the audio cable to the matching audio jacks on the computer and on the monitor.
Connecting power supply
• Connect the power cord to the power connector of the screen. Connect the other end into an
electrical outlet. The mains power outlet must be close to the monitor and easy to access. (Use the
same electric current as for the PC).
Note
Make sure that the power switch at the external mains adapter is set to "I".
Switching on the monitor
• Use the On/Standby button at the front of the device to switch on your monitor. Then switch on
your computer.
32