Christopeit Sport BG2 Notice De Montage Et D'utilisation page 12

Step 5:
Screw the dumbbell hooks (16) at the main frame (2) and secure
with screws (13), washers (15) and nuts (14). The screw shouldn't
tighten firmly, so that the hooks can move. You can storage the
dumbbells (20) onto the hooks (16).
Step 6:
Assemble the elastic ropes (19) with safety hooks at the foot
(7). Ensure before each training, that the elastic ropes (19) are
focused. Don't bend the elastic ropes (19) more than 1,80m.
Checks:
Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete. Check the correct
fitting of the expansion joints before every training and don't bend
the expansion joints more than 180cm.
1
12
2
How to storage the BG 2:
To fold up the BG 2, pull out the safety pin (12) and pull the main
frame out of foot tube holder (1) until the foot tube holder can fold
up into main frame direction. Put the safety pin into the hole for
storage. (Attention: Please be careful, if you fold up the bench.)
Note:
You can storage the dumbbells (20) onto the hooks (16). Please
keep the instructions in a safe place as these may be required for
repairs or spare parts orders becoming necessary later.
- 12 -