Attaching The Appliance To The Top Of The Cavity - Gaggenau RB 491 Instructions D'installation

13. Attaching the appliance to the top
of the cavity

Screw the attachment plate lugs (top) to the overhead
furniture/fixtures.

Fix the attachment plate side lugs (top) depending on
the installation situation.
If there is no gap or only a slight gap, it is not
necessary to fix the side lugs.

If there is a fairly large gap above the appliance,
fit a wooden beam above the appliance, ensuring that
the wooden beam fits the gap exactly.
24
NOTE

Attach the cover strip to the attachment plate (top).
Shorten the fitting strip to the required height!
In the case of a side-by-side installation connect
both cover rails to the bolt included in the
installation accessories for side-by-side installation
NOTE