Troubleshooting; Technical Data - DS Produkte GJ-FC03 Mode D'emploi

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps listed, contact the customer
service department.
Do not attempt to repair an electrical device yourself!
Problem
The battery is not
charging up. The
battery status
display (9) does not
light up when the
device is connected
to the mains power.
The device cannot
be started.
The device is not
working properly.

Technical Data

ID operating instructions: Z 07476_07656 M DS V2.1 0520 uh
Device
Model number:
Article number:
Voltage supply:
Power:
Handle
Power supply:
Battery
Charge time:
Operating time:
Mains Adapter
Model number:
Input:
Output:
Protection class:
07476_07656_DE-EN-FR-NL_A5_V2.1.indb 21 07476_07656_DE-EN-FR-NL_A5_V2.1.indb 21
21
Possible cause
The mains adapter is not
inserted correctly in the plug
socket.
The barrel connector is not
plugged in the charging sock-
et (10) of the device correctly.
The plug socket is defective.
There is no mains voltage.
The battery of the device is
too weak.
The battery in the handle (2) is
too weak.
The fl oor is unsuitable for the
device.
GJ-FC03
07476 (petrol blue / white), 07656 (blue / white)
12 V (3x Li-ion battery, 2000mAh)
40 W (max.)
12 V DC (1 x 12 V battery, A23 G)
approx. 3 – 5 hours
approx. 50 minutes (when the battery is fully charged)
HJ16021350850G
100 – 240 V, 50 / 60 Hz, 0.3 A
13.5 V DC, 850 mA
II
Fix
Correct the fi t of the mains
adapter.
Correct the connection
between the charging socket
and barrel connector.
Try another plug socket.
Check the fuse of the electri-
cal distributor (fuse box).
Charge up the battery.
Replace the battery.
The device only works on
smooth fl oors such as par-
quet, laminate, tiles etc.
26.05.2020 16:43:54 26.05.2020 16:43:54
EN