Before Initial Use; Assembling The Device; Charging Up The Battery - DS Produkte GJ-FC03 Mode D'emploi

EN

Before Initial Use

• Remove any possible fi lms, stickers or transport protection from the device. Never
remove the rating plate and any possible warnings!
• Assemble the device (see the "Assembling the Device" chapter).
• Charge up the battery (see the "Charging Up the Battery" chapter).

Assembling the Device

PLEASE NOTE: Flip up the stem mount (6) on the main unit (13). It must be upright so
that the device is deactivated and cannot be switched on accidentally.
1. Insert the tube parts (3 – 5) into one another as follows: tube → connecting piece
→ tube. You must hear each part engage in the other.
2. Plug the handle (2) onto an aluminium tube at the top. It must engage audibly.
3. Plug the stem with the handle into the stem mount on the main unit. It must engage
audibly.
To remove the stem, the handle or the individual tube parts, press the corresponding
release buttons in each case and pull out the respective part.
Attaching / Detaching Mop Pads
PLEASE NOTE!
■ The mop pads must not be attached to the cleaning feet when they are wet.

Charging Up the Battery

PLEASE NOTE!
■ Risk of short-circuits! Do not insert any conducting objects (e.g. screwdrivers or
similar items) into the charging socket.
■ Only connect the mains adapter to a plug socket that is properly installed and match-
es the technical data of the device. The plug socket must also be readily accessible
after connection so that the connection to the mains can quickly be isolated.
■ Pull the mains adapter out of the plug socket if it is not going to be used for a lengthy
period of time.
■ It is essential that you charge up the battery fully before you fi rst use the device
in order to achieve the maximum charging capacity.
1. Flip up the stem mount (6) on the main unit (13). It must be upright so that the device
is deactivated and cannot be switched on accidentally.
07476_07656_DE-EN-FR-NL_A5_V2.1.indb 18 07476_07656_DE-EN-FR-NL_A5_V2.1.indb 18
18
• Attaching: Attach one mop pad in each case to a cleaning
foot (8) using the hook and loop fastener.
• Detaching: Pull the mop pads off the cleaning feet.
26.05.2020 16:43:41 26.05.2020 16:43:41