PRO-POINT 9085986 Mode D'emploi page 7

V1.0
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety rules.
If you use this tool unsafely or incorrectly, you can suffer serious
personal injury.
Welding produces sparks, molten slag, intense white light, plus infrared and
ultraviolet light. A cooling bead can eject chips or fragments of slag. Any of
these can cause direct harm to the eyes and skin of the welder or bystanders.
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2. Arc welding requires the use a hand-held face shield or helmets with full
face protection per CSA standard Z94.3.1.
3. Protect against reflected arc rays. The rays can reflect off a shiny surface
behind the user, into the helmet and off the filter lens into the eyes.
Remove or cover any reflective surface behind the user such as a glossy
painted surface, aluminum, stainless steel or glass.
4. Welding produces sparks and molten slag. A cooling bead can eject chips
or fragments of slag. Any of these can cause direct harm to the eyes or
skin of the user or bystanders.
5. Erect protective screens or barriers to protect bystanders from the flash
and glare; warn others in the area not to watch the arc. Do not strike a
welding arc until all bystanders and you (the user) have welding shields
and/or helmets in place.
6. Immediately replace a cracked or broken helmet or a scratched or
damaged lens filter to avoid damage to the eyes or face from arc flash or
ejected molten material.
7. Do not allow the welding stick to accidentally touch the ground clamp or
grounded work. An arc flash will result from contact and can injury the
unprepared user and bystanders.
8. Do not handle hot metal or electrode stubs with bare hands. Handling
may result in a burn injury.
9. Do not use the welding machine if personal movement is confined or if
there is a danger of falling.
10. Keep all panels and covers securely in place when operating the welding
machine.
Visit www.princessauto.com for more information
AC/DC Inverter TIG/Arc Welder 9085986
7