PRO-POINT 9085986 Mode D'emploi page 12

9085986
1.1 Never use flammable gases, as they will ignite and may result in an
explosion or fire that can cause death or injury.
2. Do not attempt to mix gases or refill a gas cylinder. Exchange a cylinder or
have it refilled by a professional service.
3. Do not deface or alter the name, number or other markings on a cylinder.
Do not rely on a cylinder's colour to identify the contents. Do not connect a
regulator to a cylinder that contains a gas that the regulator was not
designed to handle.
4. Do not expose a cylinder to excessive heat, sparks, slag, flame or any
other heat source.
4.1 A cylinder exposed to temperatures above 130 °F will require water
spray cooling. This method may not be compatible with electric
welding machines due to the hazard of electrocution.
5. Do not expose a cylinder to electricity of any kind.
6. Do not attempt to lubricate a regulator. Always change a cylinder
carefully to prevent leaks and damage to the cylinder's walls, valve or
safety devices.
7. Gases in the cylinder are under pressure. Protect the cylinder from
bumps, falls, falling objects and harsh weather. A punctured cylinder
under pressure can become a lethal projectile. If a cylinder is punctured,
do not approach until all pressure is released.
7.1 Protect the valve and regulator. Damage to either can result in
regulator's explosive ejection from the cylinder.
8. Always secure a gas cylinder in a vertical position to a welding cart or
other fixed support with a steel chain, so it cannot be knocked over.
8.1 Away from areas where they may be struck or subjected to physical
damage.
8.2 A safe distance from arc welding or cutting operations and any
other source of heat, sparks or flame.
8.3 Do not use as an improvised support or roller.
9. Always place the cylinder cap securely on the cylinder unless it is in use
or being serviced.
10. Do not use a wrench or hammer to open a cylinder valve that cannot be
opened by hand. Notify your supplier for instructions.
11. Do not modify or exchange gas cylinder fittings.
12
AC/DC Inverter TIG/Arc Welder
For technical questions call 1-800-665-8685
V1.0