Publicité
Les langues disponibles
Les langues disponibles
9085986
TUNGSTEN
DIAMETER
3/64 in. (1.2 mm)
1/16 in. (1.6 mm)
3/32 in. (2.4 mm)
1/8 in. (3.2 mm)
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2.
Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or replaced by an
authorized technician. Only use identical replacement parts when servicing.
3.
Exposure to extremely dusty, damp, or corrosive air is damaging to the
welding machine. In order to prevent possible failure or fault of this
welding equipment, clean the dust at regular intervals with clean and dry
compressed air.
4.
Follow instructions for lubricating and changing accessories.
5.
Only use accessories intended for use with this tool.
6.
Keep the tool handles clean, dry and free from oil/grease at all times.
7.
Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool.
An improperly repaired tool may present a hazard to the user and/or
others.
ASSEMBLING THE TIG TORCH
1.
Insert the tungsten electrode into the collet. The collet's slots and the
electrode's point are aligned in the same direction.
2.
Slide the collet body over the collet.
34
AC/DC Inverter TIG/Arc Welder
TIP
CONSTANT
DIAMETER
INCLUDED
ANGLE
0.25 mm
0.5 mm
0.8 mm
0.8 mm
1.1 mm
1.1 mm
1.5 mm
CURRENT
RANGE AMPS
20°
05 to 30A
25°
08 to 50A
30°
10 to 70A
35°
12 to 90A
45°
15 to 150A
60°
20 to 200A
90°
25 to 250A
For technical questions call 1-800-665-8685
V1.0
CURRENT
RANGE
PULSED AMPS
05 to 60A
05 to 100A
10 to 140A
12 to 180A
15 to 250A
20 to 300A
25 to 350A
Table 5
Publicité
