1. Scope of delivery
•
Omnidirectional antenna
•
Wall mount and mast bracket
•
Installation materials
2. Installation
2.1 Fastening the antenna to a wall
2.2 Fastening the antenna to a pole
3. Technical data
Model number
Gain
Frequency range
Aperture angle, vertical
Aperture angle, horizontal
First drill suitable holes at the position
where it will be fastened. Please use the
wall mount as a drilling template to do
so. Then insert the wall plugs into the
holes.
Now fasten the mount to the wall by
screwing it on using the screws
enclosed.
Guide the pole clamp through the
openings on the rear side.
Please observe that the pole diameter
may be between 2.8 and 4.8 cms.
Now fasten the pole clamps to the pole
using one split washer and nut each.
TVAC17500
5 dBi
2.4~2.4835 GHz
31°
360°
4
English