Schaerer Coffee Club Notice D'utilisation page 100

6.5.9 Cleaning the mixer
Clean more often depending on the powder used.
* Rinse mixer
* Open the doors
* Pull the mixing cup forwards with the handle
* Lift the mixing cup slightly so that any remaining
water runs out
* Pull off the mixer hose, from the mixing cup to
the outlet, and take it out of the guide
The mixer's propeller is now visible.
* Clean the propeller with a cloth
* Disassemble the two-part mixing cup
* Clean both mixing cup parts and the mixer hose
under warm running drinking water
* Let the parts dry fully
At the time of reassembly, all openings must point
in the same direction.
* Insert the mixer hose into the outlet through the
guide
* Reinsert the mixing cup until it engages
* Attach the mixer hose to the mixing cup
Danger of scalding
• If the mixer hose is not firmly connected,
hot water or hot powder beverage can
escape unintentionally.
> Attach the mixer hose to the mixing cup.
SCClub short instructions
Animated instructions
w C offee machine
w M ain menu
w C are
w I nstructions
CAUTION
Observe the Safety chapter
w f rom page 5
45