Sony CLM-FHD5 Mode D'emploi page 17

If the hood panels come
away from the frame
A force applied to the top or side
hood panels can detach them
from the frame to prevent them
from breaking.
• If the side panels come away
from the frame
 Remove the top panel.
 Attach the side panels.
Push the projecting end of the
spring into the middle groove
along the side of the frame, and
fit the projections of the side
panel into the top and bottom
grooves along the side of the
frame.
Notes
The side panels only open if the
projecting end of the spring is
placed correctly into the groove. If
the panels do not open, reattach the
spring so that its projecting end is in
the groove.
• If the top panel comes away
from the frame
Fit the projection of the top panel
into the groove along the top of
the frame as illustrated.
17
-GB