Adjusting The Direction Of The Screen - Sony CLM-FHD5 Mode D'emploi

Carrying out the following
turns the backlight on again.
– Press either the C1 button,
C2 button, MENU button or
ZOOM/SELECT button.
– Operate the camera so that
an HDMI signal is output.
– Reconnect the HDMI cable
and turn the camera on.
To remove from the camera
Disconnect the HDMI cable and
then remove this unit from the
shoe of the camera.
 Rotate the dial of the shoe
adaptor fully in the opposite
direction to  (LOCK) to release
the lock.
 Check that the lock is released
before sliding the shoe
adaptor toward you.


Adjusting the
direction of the screen
The pan and tilt function of the
shoe adaptor lets you move
the screen of this unit in any
direction.
Approx. 90 degrees
forwards or backwards
Approx. 180
degrees left
or right
Notes
• Depending on your battery
pack and camera, this unit may
interfere with the built-in flash. Do
not pan or tilt with excessive force.
• Be careful when you pull the HDMI
cable not to stretch it or get it
caught in any movable part.
15
-GB