Connecting To An Ac Adaptor; Attaching To The Camera - Sony CLM-FHD5 Mode D'emploi

Connecting to an AC
adaptor
This unit can be powered from
the domestic power supply using
a Sony AC adaptor the
AC-PW10AM (not supplied).
Notes
• A battery pack attached to this
unit is not recharged even when
an AC adaptor is connected.
• If this unit is connected to an AC
adaptor while a battery pack is
attached, the AC adaptor power
source takes priority.
• Do not remove the battery and AC
adaptor when turning this unit on
or off. This may cause malfunction.
• Use the nearby wall outlet (wall
socket) when using the AC
adaptor. If any trouble occurs
while this unit is in use, unplug it
from the wall outlet (wall socket)
to disconnect the power.
Attaching to the
camera
Connect the shoe adaptor to this
unit and then attach it to the
camera.
Note
Do not attach a shoe adaptor except
for this unit.
1
AC-PW10AM
2
3
Insert the tripod screw of the
shoe adaptor into the tripod
receptacle of this unit.
Insert the screw of the shoe
adaptor into the receptacle of
the unit for the screw.
Turn the shoe adaptor dial to
lock.
Attach (clip) the shoe adaptor
onto the camera shoe, as
illustrated.
 Insert the foot of the shoe
adaptor in the direction
illustrated.
continued
13
-GB