Bezzera MATRIX DUO Manuel D'instructions page 51

5.12 White LED lights (DE - DUO
versions)
For machines equipped with LED lighting for the
cup rest and/or rear Bezzera logo panel, it is pos-
sible to adjust the brightness or to switch off the
lighting completely, using the appropriate screen
function. To access the function:
1) Open the drop-down menu.
2) Access the settings screen by entering the pas-
sword (if any).
1
3) Scroll with the side arrows until reaching the
Lights item, tap on
will appear, it will signal that the lights are on.
2
to turnon the lights,
MOD.
4) To adjust the brightness, tap on the word Lights
and then adjust the brightness with
.
5.13 Tank sensor calibration
Warnings: do not insert water into the tank before
calibration, ignoring the error screen that will ap-
pear as soon as the machine is started.
The Matrix and Duo machines are supplied pre-
set to tank. To use the machine in the default
mode, it is advisable to calibrate the tank sensor.
Proceed as follows to calibrate the tank sensor:
1) Open the drop-down menu.
2) Access the settings screen by entering the pas-
sword (if any).
51
BEZZERA MATRIX-DUO
and